machining center
808MT2
The 808MT2 is a multi-process machining center with linear motors and Direct Drive rotary axes, designed for machining complex, high-precision parts from bars or in piece-by-piece production.
Its high dynamics, thermal stability and energy optimization make it a particularly effective solution for the manufacture of high value-added parts requiring precision and surface quality.
Thanks to its advanced kinematics and high-speed motorized spindle, it enables combined milling and turning operations with great precision and versatility.
The ultra-compact multi-process solution designed for productivity
- Full Linear” technology for axes equipped with direct-drive motors
- High-performance motorized spindle with speeds of up to 60,000 min-1
- Maximum bar capacity of 27 mm with turning capability up to 10,000 rpm
- 2-position pick-up unit, 0° or 90°, integrating a hydraulic or pneumatic pick-up vise.
- A tool/part/pallet magazine with a capacity of up to 137 tool positions
main technical data
Our machining centers are 100% customizable, thanks to a wide range of options and equipment.
Commercial base
Basic equipment (and options).
Main linear axes
Training
Linear motors
Race X – Y – Z
250 – 120 – 210 mm
Max. feed speed
60 m/min
Continuous feed forces X – Y – Z
720 – 720 – 480 N
Resolution
0.0125 µm
Horizontal axis A
Training
Torque motor
Max. bar passage
Ø27 mm
Splitter interface
A3 cone
Continuous torque
12 Nm / 18.1 Nm
Turning mode speed
10’000 rpm
Pivot pin B
Training
Torque motor
Angular movement
-45° to +120°
Continuous torque
24 Nm
Max. speed
120 min-1
Resolution
0,0001°
Milling spindle – S1
Interface
HSK-A25
Couple S1 / S6
3 Nm / 4.5 Nm
Power S1 / S6
8.3 kW / 12.5 kW
Max. speed
42’000 min-1 (60’000 min-1)
Lubrication
Air-oil
Resolution
±0.2°
DTS (Dynamic Thermal Stabilization)
Integrated
Tool magazine – S1
Number of tool positions
74 (137)
Chip-to-chip change
< 5 sec
Max. tool diameter
Ø35 mm
Max. tool diameter (free adj. positions)
Ø70 mm
Max. tool weight
1 kg
Chip bin
Chip volume
50 L
Filtration
200 µm
Oil pan
Oil volume
80 L
Irrigation flow rate
40 L/min
Programmable HP watering
0 to 80 bar, 4 L/min
Hydraulic power pack
Operating pressure
50 bar
Dimensions
Dimensions (W x D x H)
980 x 1425 x 2070 mm
Floor area
1.4m2
Other options
For optimum customization of your needs.
Motorized spindle – S1
Watering in the center of the swivel joint
Peripheral
Cooling unit
Automation
Robot or manipulator
Filtration
HP 80 bar
Oil or emulsion vapour extractor
Various options
Fire protection
S1 tool measurement
Part check S1
Boost your productivity
In addition to our machining centers, we offer a comprehensive range of automation solutions that perfectly match your production processes, enabling the development of highly productive solutions.
