machining center
508PA
The 508PA is a machining center with 6 to 8-axis linear motors (milling and turning), dedicated primarily to the watchmaking sector.
Its high dynamics and thermal stability make it a highly productive machining center for the manufacture of high value-added parts in a single cycle: plates, bridges and movement components from bars, washers or trays.
Thanks to its automatic vertical-slide machining unit, it allows double-sided machining, turning operations as well as milling and routing thanks to a high-precision micro vice.
Absolute excellence in platinum watchmaking
- Full Linear” technology for axes equipped with direct-drive motors
- High-performance motorized spindle with speeds of up to 42,000 min-1
- Vertical slide feeder with turning capacity up to 6’000 min-1
- Maximum capacity of 96 on-board tools, to optimize machining rates
main technical data
Our machining centers are 100% customizable, thanks to a wide range of options and equipment.
Commercial base
Basic equipment (and options).
Main linear axes
Race X – Y – Z
400 – 200 – 385 mm
Max. feed speed
60 m/min
Resolution
0.0125 µm
Pivot pin B
Training
Torque motor
Angular movement
-45° à +115°
Max. feed speed
250 min-1
Resolution
0.0001°
C-axis divider
Training
Synchronous motor
Couple S1 / S6
12.2 nm/16.9 nm
Max. torque
20.5 nm
Rotational speed milling mode
200 min-1
Spin speed turning mode
6’000 min-1 (3’000 min-1 EDGE)
Motorized spindle – S1
Interface
HSK-E40 (HSK-A40/CAPTO C4)
Max. speed
30’000 min-1 (42’000 min-1)
Lubrication
Air-oil (Grease)
Resolution
±0.02°
DTS (Dynamic Thermal Stabilization)
Integrated
Tool magazine – S1
Number of tools
48 (72/96)
Tool-to-tool changeover
0.8 sec
Chip-to-chip change
< 3 sec
Tool management
Integrated
Tool breakage detection
Masked time
Numerical control
FANUC
31i-B5 PLUS iHMI Pro
Encombrement
Dimensions (L x P x H)
1870 x 2165 x 2300 mm
Surface au sol
4 m2
Autres options
For optimum customization of your needs.
Motorized spindle – S1
Watering in the center of the swivel joint
Peripheral
Cooling unit
Filtration
HP paper filter 80 or 150 bar
Precious metals kit
Chip conveyor
Automation
Robot or manipulator
Various options
224-position tool magazine
Fire protection
S1 tool measurement
Part check S1
Application examples
Our team of experts is here to make your project a success.
Bridge
Brass
Bridge
Brass
Boost your productivity
In addition to our machining centers, we offer a comprehensive range of automation solutions that perfectly match your production processes, enabling the development of highly productive solutions.
