machining center
408PA
The 408PA is a 6- to 8-axis machining center (milling and turning), dedicated primarily to the watchmaking sector and enabling the machining of plates, bridges and movement components in a single cycle, from bars, washers or barquettes.
Thanks to its automatic vertical-slide machining unit, it allows double-sided machining, turning operations as well as milling and routing thanks to a high-precision micro vice.
Platinum watchmaking excellence
- High-performance motorized spindle with speeds of up to 42,000 min-1
- Optimum compactness with integrated aggregates limits footprint to less than 2.6m2
- Vertical slide feeder with turning capacity up to 6’000 min-1
- Maximum capacity of 96 on-board tools, to optimize machining rates
main technical data
Our machining centers are 100% customizable, thanks to a wide range of options and equipment.
Commercial base
Basic equipment (and options).
Main linear axes
Race X – Y – Z
250 – 200 – 310 mm
Max. feed speed
40 m/min
Resolution
0.0125 µm
Pivot pin B
Training
Torque motor
Angular movement
-15° à +100°
Max. feed speed
250 min-1
Resolution
0.0001°
C-axis divider
Couple S1 / S6
12.2 nm/16.9 nm
Max. torque
20.5 nm
Speed in milling mode
200 min-1
Turning mode speed
6’000 min-1 (3’000 min-1 EDGE)
Motorized spindle – S1
Interface
HSK-E40 (HSK-A40/CAPTO C4)
Max. speed
30’000 min-1 (42’000 min-1)
Lubrication
Air-oil (Grease)
Resolution
±0.02°
DTS (Dynamic Thermal Stabilization)
Integrated
Tool magazine – S1
Number of tools
48 (72/96)
Tool-to-tool change
0.8 sec
Chip-to-chip change
< 3 sec
Tool management
Integrated
Tool breakage detection
Masked time
Numerical control
FANUC
31i-B5 PLUS iHMI Pro
Dimensions
Dimensions (W x D x H)
1685 x 1795 x 2305 mm
Floor area
3 m2
Other options
For optimum customization of your needs.
Motorized spindle – S1
Watering in the center of the swivel joint
Horizontal axis A
Various clamps
Peripheral
Cooling unit
Filtration
Chip tray with drawer
HP paper filter 80 or 150 bar
Precious metals kit
Chip conveyor
Oil or emulsion vapour extractor
Automation
Robot or manipulator
Various options
Fire protection
S1 tool measurement
Part check S1
Application examples
Our team of experts is here to make your project a success.
Bridge
Brass
Bridge
Brass
Boost your productivity
In addition to our machining centers, we offer a comprehensive range of automation solutions that perfectly match your production processes, enabling the development of highly productive solutions.
